2-58
Using the Origin Point Setting Function
<Origin Point Setting>
When a small size image such as an A4 size image is printed on
64-inch width media, a large blank will be generated as the figure
shows below.
In this case, rewind the print media and newly set the print origin
point to print an image on the blank area.
The print origin point setting at media rewinding is called the “Origin
Point Setting Function.”
(1st time printing)
(Media rewinding)
(2nd time printing)
<How to Use the Origin Point Setting Function>
1
Lift the pressure roller up/down lever and rewind the
media.
-
Rewind the media after the media is thoroughly dried.
If drying is not sufficient, the previously printed image may
be damaged.
SET PAPER
PUSH DOWN LEVER
NOTE
Pressure roller up/down lever
Origin point
Base point
Blank area
Summary of Contents for IP-6900
Page 4: ......
