2-53
Section 2 Basic Operations
Tension Bar Length Adjustment
Use the same tension bars on the feed side and the take-up side.
Insert the exclusive flange and fixing ring before attaching the
tension bar on the take-up side.
One set of tension bars includes 2 S size (16 inch, about 40.6cm)
bars, 1 M size (24 inch, about 60.7cm) bar and 1 L size (48 inch,
about 123.3cm) bar; and 4 flanges.
Jointing method (feed side)
The bars connect by being screwed in to one another. If all 4 are
connected, the total length is 104 inches. The L size bar has male
joints on both ends, and must always be used. The M and S size
bars have female joints at one end for jointing to the L size bar.
Both ends of the jointed tension bar should be male to attach the
flanges.
L size (48 inch): 1 bar
M size (24 inch): 1 bar
S size (16 inch): 2 bars
Flanges: 4
Flanges for use with tension bar guide: 2
Fixing rings: 2
Summary of Contents for IP-6900
Page 4: ......
