2-63
Section 2 Basic Operations
Heater preset temperature by media
Recommended heater temperature and print mode set values (initial
values) by media are listed in the table below. Preset the heater
temperature according to the media you use.
It is recommended that the front heater, the printer heater and the
rear heater be set to 50
°
C, 45
°
C and 50
°
C or lower, respectively.
When the print heater is set to higher than 45
°
C, we recommend
setting the head action mode to "HIGHLIGHT PRIORITY."
NOTES
-
When the printer heater temperature is set to high, fixing
of the ink is improved, but media wrinkle or matte media
surface may be caused.
Adjust heater temperature according to the media type and
ambient temperature.
-
When the print heater temperature is set to high, the printer
may print at low speed to ensure stable print quality .
-
Set the front/rear heater temperatures 5
°
C higher than
the print heater’s.
Bad temperature balance between the front/rear heater
and print heater may cause media wrinkle.
Media
Type
Recommended preset
temperature
Print mode
FRONT
REAR
Glossy vinyl
chloride
Glossy
45° C
40° C
45° C
Normal 4-pass
bi-direction
Matte vinyl
chloride
Matte
45° C
40° C
45° C
Normal 4-pass
bi-direction
Banner
Banner
45° C
40° C
45° C
Normal 4-pass
bi-direction
Changing Heater Control Setting Temperature
Summary of Contents for IP-6900
Page 4: ......
