2-16
4
Set the feed direction switches.
5
Slacken the media using the Feed switch and insert the
media edge into the paper feeder.
(1) Insert the media into the paper feeder while
stretching the media with your hands to prevent
wrinkle.
If the media curls and is hard to insert into the
paper feeder, place a backing sheet on the curled
media and insert the media edge. (See the figure
at left.)
(2) Feed the media until its top edge is about to
reach the floor. At this time, smooth the media
toward both sides on the platen so that the
central area of the media is tensioned.
-
Inserting the media obliquely or inserting wrinkled media
causes a paper jam or skewed feed.
Feed direction switch
Winder switch (white)
Feed switch (green)
■
Feed direction switch, Winder switch, Feed switch
Inner take-up
Outer take-up
Media
Media
• Up-curl
• Down-curl
NOTE
Summary of Contents for IP-6900
Page 4: ......
