Important functions (selection)
7.2 Diagnostics functions
SIPROCESS UV600
Operating Instructions, 10/2013, A5E03529375-02
77
Measured values as time axis 6 minutes/120 minutes
Menu call:
Main menu → Diagnostics → Measured values → Y
-T trend 6 min. or Y-T trend 120 min.
The following menu is then displayed (example)
A Y-T trend shows the progression of the measured values within the last 6 or 120 minutes.
Up to 8 different Y-T trends can be displayed. If the analyzer has more than 8 measured
components, two measured values are displayed in each Y-T trend.
Use the
and
keys to navigate to further measured values (if present).
Measured values as output currents (display in mA)
Menu call:
Main menu → Diagnostics → Measured values → Current outputs
The following menu is then displayed (example):
The menu shows the measured values that are output via an analog output as signals of the
analog output. The measured values from different measuring points can be seen here in
lines 2 and 3. However, measured values with data on the measuring point are only present
if measuring point switching had previously been switched on.
Use the
and
keys to navigate to the lines, and branch to detailed information
there by pressing
.