Important functions (selection)
7.3 Calibration and validation functions
SIPROCESS UV600
Operating Instructions, 10/2013, A5E03529375-02
103
Use
These settings define:
●
The measured components for which the calibration gas can be used
●
Which physical parameters apply to which calibration procedures and validation
measurements.
Menu call:
Main menu → Calibrations → Settings → Calibration gases → Calibration gas setting → Use
The following menu is displayed with the previously set components with their setpoints and
use IDs or the vacant locations (example).
You can now change the settings for the desired component using the
,
and
keys or add a new component by occupying a vacant location.
Parameterization of a measured component
Menu call:
Main menu → Calibrations → Settings → Calibration gases → Calibration gas setting → Use →
Measured component
The following menu is displayed with the previously set parameters of the selected
component (example).