Mounting and connecting
4.5 Electrical connections
SIPROCESS UV600
38
Operating Instructions, 10/2013, A5E03529375-02
Plug connector X7 – analog outputs (AO) and analog inputs (AI)
Analog outputs
Figure 4-8
Plug connector X7 - analog outputs
Characteristic of analog outputs (see also Auto-Hotspot):
The analog outputs are floating (electrically isolated) and provide a load-independent current
signal.
●
Signal range 0...24 mA
●
Residual ripple 0.02 mA
●
Resolution 0.1%
●
Accuracy 0.25% of full-scale value
●
Maximum load 500 Ω
●
Maximum voltage ±50 V
●
Adjustable start or fault state
Note
Electrical isolation
The electrical isolation is canceled if the negative poles of the analog outputs are
connected to GND