Important functions (selection)
7.5 Parameter assignments
SIPROCESS UV600
156
Operating Instructions, 10/2013, A5E03529375-02
Setting the auxiliary value
1.
Use the
and
keys to select parameter 4 'Auxiliary values'.
2.
In the follow-up menu, use the
key to select the desired parameter.
3.
Use the
,
and
keys to set the desired state.
The states have the following meanings:
On The current measured value and the measured values of all measuring points are
available in menus and measured-value displays for the measured components and
auxiliary values
Off Only the current measured value is available in menus and measured-value displays
for the measured component and auxiliary value
7.5.12
Starting user functions
User functions are individual functions programmed using the "SOPAS ET" PC software.
You can use this menu to carry out a manual start. The menu is empty if no user functions
are programmed.
Menu call:
Main menu → Parameters → Additional functions → Measuring point switchover → Measured
values
Example of the displayed menu: