Operation
6.2 Initial operating steps
SIPROCESS UV600
Operating Instructions, 10/2013, A5E03529375-02
63
The following menu is displayed (example):
Figure 6-3
Menu 'Authorized user' for input of password.
4.
Change the displayed password to "HIDE" as follows:
–
Press the
key in order to set the cursor to the desired position.
–
Press the
key to change to edit mode for characters.
–
Press the
and
keys until the correct character is displayed.
–
Press the
key to select the character. The character then appears at the cursor
position.
–
If "HIDE" is displayed as the password, press the
key.
The message 'Aut. user successful' is displayed.
Note
Duration of validity
User level 1 now remains active for the time set as the duration up to the next
automatic log-off.
See also
Introduction to operation (Page 60)