Important functions (selection)
7.5 Parameter assignments
SIPROCESS UV600
150
Operating Instructions, 10/2013, A5E03529375-02
7.5.9
Parameterization of digital communication
7.5.9.1
Configuring a LAN connection
Menu call:
Main menu → Parameters → Communication → LAN
The following menu is displayed (example):
The "5 MAC address" parameter is not shown here
You can now change one of the addresses as follows:
●
Use the
,
and
keys to select the associated address
●
Set the new address in the follow-up menu as described in section Character input
(Page 64).
Restarting the internal LAN controller
Use the
,
and
keys to select the "4 Restart Ethernet" parameter, and
activate the function by pressing the
key.
This function is always used should the LAN connection be faulty or cannot be established in
the normal manner.