Important functions (selection)
7.2 Diagnostics functions
SIPROCESS UV600
Operating Instructions, 10/2013, A5E03529375-02
73
Limit status
Menu call:
Ma
in menu → Diagnostics → Status → Limits.
The following menu with the limit status of the individual components is then displayed
(example).
L means that the associated component is outside the measuring range and the limit has
therefore been triggered. If you select the individual measured components, you are
provided with information on the limits and the current measured value.
The following menu is then displayed (example):
The characters following the limits have the following meaning:
ok
The current measured value is within the set limits
(-)
The current measured value is smaller than the limit set for 'Message with low
violation'
(+)
The current measured value is greater than the limit set for 'Message with high
violation'