Siemens SINAMICS S120, Function Manual

Page: 434 / 1094

Basic functions
7.30 Web server
Drive functions
434
Function Manual, 11/2017, 6SL3097-4AB00-0BP5
The "Administrator" user has the full rights as standard. However, only restricted access
rights apply for the standard "SINAMICS" user.
Note
Secure passwords
SINAMICS specifies almost no password rules for the assignment of passwords. The only
rule is that at least 8 characters are used. You can therefore assign any passwords without
restriction. STARTER does not make any checks for illegal characters or passwords which
have already been used. Therefore, as the user, you are responsible for the required
password security.
Use a sufficiently long password (max. ten characters). Use special characters and avoid
passwords which you have already used elsewhere.
Please note that if the Windows language settings are changed, errors can occur when
subsequently checking the password. If you use language-specific special characters, you
must ensure that the same language setting is active on the computer for subsequent entry
of the password.
To enable a user and activate a password, proceed as follows:
1.
Activate the checkbox of the user that you wish to enable (e.g. enable "SINAMICS" user,
etc.).
2. For a "SINAMICS" user, also activate the "With password" option.
The "Specify password" button below the option button then becomes active.
3. Click the "Specify password" button.
The "Web Server - Specify Password" dialog box opens.
Figure 7-28 Specifying the web server password
4. Enter the new password in the "New password" input field. Pay attention to upper and
lower case.