![background image](http://html.mh-extra.com/html/sick/flexi-classic/flexi-classic_operating-instructions-manual_1264300060.webp)
Chapter
7
Operating Instructions
Flexi Classic Gateways
60
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8011834/YT28/2016-03-15
Subject to change without notice
Modbus/TCP Ethernet Gateway
The installed Flexi Classic modules are recognised automatically and listed in the
Flexi
Chassis Configuration field
. Modules of the next Flexi Classic generation that are not yet
recognised by the UE410-EN3 are listed as “Unknown Module”. The corresponding front
and the data structure of the module can be displayed by clicking a module. In the
example, a click on
Module 1
displays a new window with the corresponding information.
The window can subsequently be closed again.
After resetting the UE410-EN3 back to the factory settings, all modules are displayed as
“Unknown Module” until a hardware reset of the entire Flexi Classic system has been
carried out (see section 7.6).
In order to use Data set 6, click
Set 6
. The following web page is displayed and shows
the current compilation of Data set 6:
Click
Configure Set 6
, to compile the user defined data record. The following web page
is displayed:
Note