Chapter
10
Operating Instructions
Flexi Classic Gateways
132
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
8011834/YT28/2016-03-15
Subject to change without notice
PROFINET IO Gateway
Data set 6, can be compiled by the user
The contents of data set 6 can be compiled by the user. This allows efficient PLC memory
management for UE410
F
EN diagnostic data.
Open a web browser on a PC in the network and go to the address of the UE410
F
EN.
Click
Flexi System Interface Configuration
on the UE410
F
EN homepage. The following
web page is displayed:
The installed Flexi Classic modules are recognised automatically and listed in the
Flexi
Chassis Configuration
field. Modules of the next Flexi Classic generation that are not yet
recognised by the UE410
F
EN are listed as “Unknown Module”. The corresponding front
and the data structure of the module can be displayed by clicking a module. In the exam-
ple, a click on
Module 1
displays a new window with the corresponding information. The
window can subsequently be closed again.
After resetting the UE410
F
EN back to the factory settings, all modules are displayed as
“Unknown Module” until a hardware reset of the entire Flexi Classic system has been
carried out (see section “Resetting to factory settings” below).
Note