Operating Instructions
Chapter
10
Flexi Classic Gateways
8011834/YT28/2016-03-15
© SICK AG • Industrial Safety Systems • Germany • All rights reserved
143
Subject to change without notice
PROFINET IO Gateway
10.8
Error type definitions in PROFINET IO
The following table matches the PROFINET IO error type (as defined by the GSDML) to the
appropriate message.
Error type
Message
0x106
Internal flex-bus error: Unknown SDO type (read, write). Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x107
Internal flex-bus error: Error on the reception of the data frame. Check for EMC
requirements. Contact SICK service if problem persists.
0x108
Internal flex-bus error: No frame bytes received. Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x109
Internal flex-bus error: Checksum error detected. Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x10a
Internal flex-bus error: No frame bytes received in the slave. Check connection
between modules. Contact SICK service if problem persists.
0x110
Internal flex-bus error: Data frame could not be sent. Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x111
Internal flex-bus error: Unknown error in RecFrameErrorCheck(). Power cycle Flexi
Classic system. Contact SICK service if problem persists.
0x112
Internal flex-bus error: Invalid frame revision received. Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x114
Internal flex-bus error: Continuous indexing check erroneous. Power cycle Flexi
Classic system. Contact SICK service if problem persists.
0x115
Internal flex-bus error: TX error: hold-register not clear. Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x116
Internal flex-bus error: Not all characters received within timeout. Power cycle Flexi
Classic system. Contact SICK service if problem persists.
0x117
Internal flex-bus error: SDO.cnt timeout. Power cycle Flexi Classic system. Contact
SICK service if problem persists.
0x118
Internal flex-bus error: Error in frame counter. Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x201
Internal resource error: Internal error in Delay (). Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x202
Internal resource error: Error on handling with T0. Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x203
Internal resource error: Error on deleting the flash page. Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x204
Internal resource error: Error in FlashWriteByte(). Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x205
Internal resource error: Timer management error in SAPL. Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x206
Internal resource error: Error on AdcStartSample(). Power cycle Flexi Classic
system. Contact SICK service if problem persists.
0x207
Internal resource error: Error on AdcDone(). Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x208
Internal resource error: Cross comparison SL-CRCs negative. Power cycle Flexi
Classic system. Contact SICK service if problem persists.
0x341
Internal program memory error: Flashtest error. Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x342
Internal program memory error: RAMtest error. Power cycle Flexi Classic system.
Contact SICK service if problem persists.
0x401
Self diagnostics error: System tick 1 ms exceeded in HAL SystemTickhandler().
Contact SICK service.
0x402
Self diagnostics error: System tick 4 ms exceeded. Contact SICK service.
0x403
Self diagnostics error: System tick 4.1 ms exceeded. Contact SICK service.
0x404
Self diagnostics error: Self test asynchronous. Contact SICK service.
0x405
Self diagnostics error: Error during cross comparison (Tx). Contact SICK service.
0x406
Self diagnostics error: Error during cross comparison (Rx). Contact SICK service.
0x407
Self diagnostics error: Error on watchdog relay (does not open). Contact SICK
service.
0x408
Self diagnostics error: Error on HAL_Synchronized. Contact SICK service.
0x409-0x41a
Self diagnostics error: Contact SICK service.
Tab. 120: PROFINET IO error
types