SICK 6052873, Operating Instructions Manual

Page: 72 / 144

Functions
72 © SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
Graph You can configure settings related to the display method of the graph
of each area.
Item Bank Options or setting range Default value Reference page
Graph scale Y
1 to 6 1 [7.7 Calculation Settings]
Graph range Y
0 to 6 0
Span Y 0.001 to 1.999 [multiplier] 1.000
Average Y 1 to 1023 [number of times] 32
Hold Y None, Sample, Peak, Bottom None
Calc
You can perform calculations between areas.
You can set up to two area calculations.
Item Bank Options or setting range Default value Reference page
Graph scale Y
1 to 6 1 [7.7 Calculation Settings]
Graph range Y
0 to 6 0
Span Y 0.001 to 1.999 [multiplier] 1.000
Hold Y None, Sample, Peak, Bottom None
Calc target1 Y Area1, Area2, Area3, Area4 Area1
Operator Y +, - +
Calc target2 Y Area1, Area2, Area3, Area4 Area2
Output (OUT1 to OUT3) You can configure settings related to the output display.
Item Bank Options or setting range Default value Reference page
Out target Y
Area1, Area2, Area3, Area4, Calc1, Calc2 Area1 [7.8 Output Settings]
Upper limit Y
-32.766 to +32.767 +25.000
Lower limit Y -32.767 to +32.766 -25.000
Out action Y Normal, 1shot, OnDelay, Ready, Strobe,
1shot2
Normal
Out polar Y N.O., N.C. N.C.
Output time Y 0.1 to +204.7 [ms] 0.1
Offset value Y -32.767 to +32.767 0.000
Hysteresis Y 0.000 to 2.000 0.000
Offset Y OFF, ON OFF