Functions
78
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
Tips: • When the area/calculation hold setting is set to other than "None", the
calculated storage value will be different from the displayed value.
• Example: Measured value and storage value operation when the hold
setting is "Peak"
7.4
Camera Settings
7.4.1
Camera Mode
Select the camera mode. For “Hi-res” mode and “Hi-spd” mode,
one measurement is performed for each image.
For “HDR” mode and “NR” mode, two images are taken by the camera
for each trigger, and then one measurement is performed for these
two images.
Tips: • After the camera mode is changed, measurements are not performed
for the first two triggers.
Camera mode: “Hi-res”
All pixels will be used by the camera to take a high resolution image.
Normally use this mode.
Camera mode: “Hi-spd”
Pixels will be averaged in sets of four. Image capture time will be 1/4
but resolution will be half in both the horizontal and vertical directions.
HOLD
(7FFF)
Measurement
result
Storage value
Measured value
