SICK 6052873, Operating Instructions Manual

Page: 69 / 144

8017035/ZMO9/2017-06-08 • © SICK AG • Subject to change without notice. 69
Functions
7 Functions
7.1 Settings Lists and Factory Settings
This section contains lists of settings and the corresponding factory
settings.
The tables are categorized according to the sensor tabs.
Table items marked with “Y” in the “Bank” column can be set for each
bank. Items that have an “N” for their bank are shared between all banks.
Input/Trigger
Item Bank Options or setting range Default value Reference page
IN1 N
BANK1, Reset BANK1 [7.2 Input/Trigger Set-
tings]
IN2 N BANK2, Hold BANK2
IN3 N BANK3, Trigger BANK3
IN4 N Offset, LaserOFF Offset
Reset – The following measured values will
be cleared.
• The current measured value
• The held value
–
Inner hold – OFF, ON OFF
Inner trig – OFF, ON ON
Input polar N N.O., N.C. N.O.
Trig action Y Cont, 1shot, Count Cont
Trig count Y 1 to 4095 [number of times] 1
Inp filter N 5 to 1275 [μs] * In steps of 5 μs 5
Trig delay Y 5 to 20475 [μs] * In steps of 5 μs 5
Offset target N Indivi, All, OUT1, OUT2, OUT3 Indivi
Storage
Item Bank Options or setting range Default value Reference page
Storage N OFF, Measure, Profile Measure [7.3 Storage Settings]
No.of Data N 1 to 65535 1000
Start cond N Continue, Hold in, Measure, Alarm, UP
limit, LOW limit
Continue
Start pos N -10000 to +10000 0
Start target – Area1, Area2, Area3, Area4, Calc1, Calc2 Area 1
Threshold N -999.999 to +999.999 0
Intermittent N 0 to 8191 10
Repeat N ON, OFF, Pause ON