Setup and Measurement Procedures
22
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
4.2.3
Initialize Settings
This section describes how to initialize settings.
You can initialize one bank at a time or all banks at the same time.
Related page
Screen image
Operation
Sensor
screen
To initialize settings, on the
“Other” tab, display the “Initi-
alize” menu, select “Bank” or
“All,” and then press the
“SET” button.
When the confirmation screen
displays the message “Reset to
factory initial value.,” press the
“SET” button again to execute
initialization.
Setup
software
On the measurement screen,
click “Common Setup.” The
Common Setup screen displays.
Click the target that you want to
initialize, and click “Bank Clear.”
A confirmation dialog displays.
Click “Yes” to execute initializa-
tion.
Tips: •
If you select “All” on the initialization menu, the Profiler 2 will restart.
