Operating the Sensor
40
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
5.4
Graph/Calc
The measured results of each area are displayed as a graph.
You can also set calculation functions for adding or subtracting area
measured results.
You can set up to two calculation formulas in the format
(calculation
target 1) (operator) (calculation target 2)
.
Example: If calculation target 1 is “area 1,” calculation target 2 is “area 2,”
and the operator is “+,” the calculation formula will be:
(area 1) + (area 2)
.
Table items marked with “Y” in the “Bank” column can be set for each
bank. In the same manner, items that have an “N” for their bank are
shared between all banks.
Graph/Calc screen
Reference: See “7.7 Calculation Settings.”
