PRO2-Navigator Setup Software
52
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
Number Display item Description
Operation
3
Comm
Display the Comm menu.
• Send Param
Sends communication settings
to the sensor head.
• Receive Param
Receives communication settings
from the sensor head.
• Connect
Connect to the sensor head.
• Disconnect
Disconnect from the sensor head.
4
Help
Display the Help menu.
• About ‘PRO2-Navigator’
Display the software version information.
5
Trigger
Turn trigger operation on or off.
Click to switch the trigger between on and off.
6
Reset
Reset the measured value.
Click to reset.
7
Hold
Turn the hold operation on or off.
Each click of the button switches the hold operation
between on and off. On/off status is indicated by the lit
status of the icon.
8
Bank
Switch the bank.
Select the bank number from “1” to “8.” When you change
this setting, “Bank switch” automatically changes to “Comm.”
9
Sampling
period
Display the sampling period.
—
ß
Scaling
Expand or shrink the display area.
Expand the display area in the vertical direction.
Shrink the display area in the vertical direction.
Expand the display area in the horizontal direction.
Shrink the display area in the horizontal direction.
à
Display area
Display the profile.
—
á
Command
buttons
Set the Measurement screen.
Update: Update the profile display once.
Continuous update: Continuously update the profile
display.
Save: Save the displayed profile data to a .csv file
â
Output
display
Display status of “Out1,” “Out2,”
“Out3,” and “Analog Out”.
OFFSET Execute the offset on or clear the offset
from the target output.
ã
Common
Setup
Display the Common Setup screen.
ä
Storage
Display the storage function setup
and execution screen.
å
Settings
Display the Measurement Setup
screen.
æ
Connect,
Disconnect,
Send Param,
and Recv.
Param
Connect or disconnect the sensor
head and the computer.
Click to connect the sensor head and the computer.
If the connection fails, a confirmation dialog box will display,
and you will be switched to the Common Setup screen.
When a connection is established, the “Disconnect,”
“Send Param,” and “Recv. Param” buttons display.
