PRO2-Navigator Setup Software
50
© SICK AG • Subject to change without notice. • 8017035/ZMO9/2017-06-08
6.2.3
Settings for High-speed Communication
To enable high-speed communication with the PRO2, we recommend
that you configure the settings of the communications port. Change the
“Latency Timer” setting to 1. Please refer to the operation instructions
of your Base OS. However this setting will increase load on the computer
during communication. If operation becomes unstable, return the settings
to their previous values.
Uninstallation Procedure
Tips: • Exit the setup software before uninstalling.
• Delete the entire folder where the “PRO2-Navigator” install file is saved.
