Schweitzer Engineering Laboratories SEL-311B, Instruction Manual

Page: 345 / 602

Date Code 20011205 Command Summary 1
SEL-311B Instruction Manual
SEL-311B Relay Command Summary
Access
Level 0
Command
The only thing that can be done at Access level 0 is to go to Access Level 1. The screen prompt is: =
ACC Enter Access Level 1. If the main board password jumper is not in place, the relay prompts for entry of the
Access Level 1 password in order to enter Access Level 1.
Access
Level 1
Commands
The Access Level 1 commands primarily allow the user to look at information (e.g., settings, metering), not
change it. The screen prompt is: =>
2AC Enter Access Level 2. If the main board password jumper is not in place, the relay prompts for entry of the
Access Level 2 password in order to enter Access Level 2.
BAC Enter Breaker Access Level (Access Level B). If the main board password jumper is not in place, the relay
prompts for entry of the Access Level B password.
BRE Display breaker monitor data (trips, interrupted current, wear).
COM p L Show a long format communications summary report for all events on M
IRRORED
B
ITS
™ Channel p .
COM p n Show a communications summary for latest n events on M
IRRORED
B
ITS
Channel p .
COM p m n Show a communications summary report for events n through m on M
IRRORED
B
ITS
Channel p .
COM p d1 Show a communications summary report for events occurring on date d1 on M
IRRORED
B
ITS
Channel p .
COM p d1 d2 Show a communications summary report for events occurring between dates d1 and d2 on M
IRRORED
B
ITS
Channel p . Entry of dates is dependent on the Date Format setting DATE_F (=MDY or YMD).
COM C p Clears the communications summary report for Channel p .
DAT Show date.
DAT m/d/y Enter date in this manner if Date Format setting DATE_F = MDY.
DAT y/m/d Enter date in this manner if Date Format setting DATE_F = YMD.
EVE n Show event report number n with 1/4-cycle resolution.
EVE L n Show event report number n with 1/16-cycle resolution.
EVE R n Show raw event report number n with 1/16-cycle resolution.
EVE C n Show compressed event report number n for use with SEL-5601 Analytic Assistant.
GRO Display active group number.
HIS n Show brief summary of the n latest event reports.
HIS C Clear the brief summary and corresponding event reports.
INI Displays input/output contact information.
INI T Displays I/O contact information and I/O board type.
IRI Force synchronization attempt of internal relay clock to IRIG-B time-code input.
MET k Display instantaneous metering data. Enter k for repeat count.
MET D Display demand and peak demand data. Enter MET RD or MET RP to reset.
MET E Display energy metering data. Enter MET RE to reset.
MET M Display maximum/minimum metering data. Enter MET RM to reset.
QUI Quit. Returns to Access Level 0. Terminates SEL Distributed Port Switch Protocol (LMD) protocol
connection. Available in all access levels.
SER n Show the latest n rows in the Sequential Events Recorder (SER) event report.
SER m n Show rows m through n in the Sequential Events Recorder (SER) event report.
SER d1 Show rows in the Sequential Events Recorder (SER) event report from date d1 .
SER d1 d2 Show rows in the Sequential Events Recorder (SER) event report from date d1 to d2 . Entry of dates is
dependent on the Date Format setting DATE_F (= MDY or YMD).
SER C Clears the Sequential Events Recorder (SER).
SHO n Show relay settings (overcurrent, reclosing, timers, etc.) for Group n .
SHO L n Show SEL
OGIC
®
control equation settings for Group n .
SHO G Show global settings.
SHO P n Show Port n settings.
SHO R Show Sequential Events Recorder (SER) settings.
SHO T Show text label settings.