Savch S3100A Series, User Manual

Page: 90 / 157

86
04-32 PULSE filter time 
Factory setting
0.10s
Setting range 0.00s
～
10.00s
This group of parameters is used for setting, the relationship between MI5 pulse frequency and the corresponding
setting.
The pulse frequency can only be input to the inverter through the MI5 channel. The application of this group of
functions is similar to AVI curve 1, please refer to the description of AVI curve 1.
04-33
AVI curve selection

Factory setting
321
Setting range
Single digit AVI 1 curve selection
1 AVI curve 1(2 points,refer to 04-11 ～
04-14
)
2
AVI curve 2(2 points,refer to 04-16 ～
04-19
)
3 Reserved
4 Reserved
5 Reserved
Tens digital
AVI2/ACI curve selection, same as above
Hundreds
digital
Reserved
The single digit and tens digital of this parameter are used to select the setting curve corresponding to analog
input AVI1, AVI2/ACI respectively.
Two kinds of analog input can choose any one of two kinds of curves.
04-34 AVI is less than the minimum input setting selection

Factory setting
000
Setting range
Single digit AVI1 is less than the minimum input setting selection
0 Corresponding analog lower limit
1 0.0%
Tens digital
AVI2/ACI is less than the minimum input setting selection, same as
above
This parameter is used to select the analog value when the analog input voltage is less than the set "minimum
input".
The analog lower limit value refers to the less limit value of parameters 04-11 and 04-16.
If the selection is 1, when the AVI input is less than the minimum input, the corresponding setting of the analog
quantity is 0.0%.
04-35 MI1 delay time
Factory setting
0.0s
Setting range 0.0s ～ 3600.0s
04-36
MI2 delay time
Factory setting
0.0s
Setting range 0.0s
～
3600.0s
04-37 MI3 delay time
Factory setting
0.0s