29
3.2.5 Running State
3.2.5.1 Power On Initialization
On the course of inverter power on, the system is initialized firstly, LED displays ”- - - - -” with 7 indicators on.
The inverter is in standby state after finishing initialization.
3.2.5.2 Standby
Under stop or running status, various status parameters can be displayed. The function code 08-03 / 08-04
(operation parameter) and 08-05 (stop parameter) can be used to select whether to display this parameter
according to the binary digits. Please refer to the descriptions of 08-03, 08-04 and 08-05 for the definition of each
bit .
In the stop state, there are 12 stop state parameters that can be selected to be displayed or not, which
are:set frequency, bus voltage, switch input state, open collector output state, analog input AVI1 voltage, analog
input AVI2 voltage, count value, The length value, the number of PLC segments, the load speed, the PID setting,
and the PULSE input pulse frequency are selected by function code 08-05 by bit (converted to binary). ENT +
QUICK / JOG key to switch to the left to display selected parameters.
3.2.5.3 Motor Parameters Self-learning
Please see the description of function code 01-01 for details.
3.2.5.4 Operation
In the running state, there are 28 state parameters that can be selected to be displayed or not,
respectively:running frequency, set frequency, bus voltage, output voltage, output current, output power, output
torque, MI input status, MO output status, AVI1 Voltage, AVI2 voltage, count value, length value, load speed
display, PID setting, PID feedback, PLC segments, PULSE input pulse frequency, operating frequency 2,
remaining operating time, voltage before AVI1 correction, voltage before AVI2 / ACI correction, Line speed,
current power-on time, current running time, communication setting value, main frequency X display, auxiliary
frequency Y display. Whether to display is selected bit by bit (converted to binary) by function code 08-03 / 08-04,
press " > "Key sequence switch to display the selected parameter, press DATA / ENT + QUICK / JOG key to
switch to display the selected parameter to the left in order.
3.2.5.5 Alarms
S3100A series inverter provides of alarm information. Please see the alarms and solutions of S3100A series
inverter for details.
Summary of Contents for S3100A Series
Page 1: ...S3100Aseries inverter General Open loop Vector Control IM User manual User Manual ...
Page 24: ...20 Size 5 Unit mm S3100A 4T45G 55P 4T110G Size 6 Unit mm S3100A 4T110G 132P 4T160G 185P ...
Page 25: ...21 Size 7 Unit mm S3100A 4T185G 200P 4T220G Size 8 Unit mm S3100A 4T220G 250P 4T315G ...
Page 26: ...22 Size 9 Unit mm S3100A 4T315G 355P 4T400G 450P Size 10 Unit mm S3100A 4T450G 500P 4T500G ...
