108
Frequency arrival
detection signal
（
MO1,RELAY,DFM(M)
Output frequency Hz
FDT Level
FDT hysteresis
ON
Time
Time
=09-19x09-20
Figure 5-17 Schematic diagram of FDT level
09-21
Frequency reach detection width
Factory setting
0.0%
Setting range 0.00
～
100%(Max frequency )
When the running frequency of the inverter is within a certain range of the target frequency, the multi-function
output terminal (function 4) of the inverter outputs an ON signal.
This parameter is used to set the detection range of frequency arrival. This parameter is a percentage relative to
the maximum frequency. Figure 5-18 is a schematic diagram of frequency arrival.
Frequency arrival
detection signal
Output frequency Hz
Set frequency
Detection
amplitude
ON
Time
ON
Figure 5-18 Schematic diagram of the frequency arrival detection amplitude
Summary of Contents for S3100A Series
Page 1: ...S3100Aseries inverter General Open loop Vector Control IM User manual User Manual ...
Page 24: ...20 Size 5 Unit mm S3100A 4T45G 55P 4T110G Size 6 Unit mm S3100A 4T110G 132P 4T160G 185P ...
Page 25: ...21 Size 7 Unit mm S3100A 4T185G 200P 4T220G Size 8 Unit mm S3100A 4T220G 250P 4T315G ...
Page 26: ...22 Size 9 Unit mm S3100A 4T315G 355P 4T400G 450P Size 10 Unit mm S3100A 4T450G 500P 4T500G ...
