3
△
!
CAUTION
● Never touch heat sink or discharging resistor since temperature may be very high.
● Since it is easy to change running speed from low to a high speed, verify safe working range of motor and
machine before running.
● Pay attention to relative equipments before using the brake unit.
● Do not check signals during running.
● All parameters of the inverter have been preset at the factory according to line frequency. Do not change
the settings value at will.
● Please confirm that the power is turned off and wait for 10 minutes before disassembly or inspection.
Check and maintenance
△
!
CAUTION
● Ambient temperature for operating the inverter shall be -10
℃
to + 40
℃
and 90%RH no condensation.
● After removing the cover, ambient temperature for operating the inverter shall be -10
℃
to + 50
℃
and
95%RH no condensation, the ambient environment must be without drips of water or metal dust. If it was,
the cover shall be set and check ambient temperature is within -10
℃
to + 40
℃
.
Disposal precaution
△
!
CAUTION
● Explosion may occur when burning the electrolytic capacitor of the main circuit and printing plate. Toxic gas
may be generated when burning control panel and other plastic fittings.
● It shall be treated as Industrial waste when disposing of it
Summary of Contents for S3100A Series
Page 1: ...S3100Aseries inverter General Open loop Vector Control IM User manual User Manual ...
Page 24: ...20 Size 5 Unit mm S3100A 4T45G 55P 4T110G Size 6 Unit mm S3100A 4T110G 132P 4T160G 185P ...
Page 25: ...21 Size 7 Unit mm S3100A 4T185G 200P 4T220G Size 8 Unit mm S3100A 4T220G 250P 4T315G ...
Page 26: ...22 Size 9 Unit mm S3100A 4T315G 355P 4T400G 450P Size 10 Unit mm S3100A 4T450G 500P 4T500G ...
