Savch S3100A Series, User Manual

Page: 42 / 157

38
04 Input terminal parameters

indicates that the parameters can be set during operation.
Parame
ter
Parameter function Setting range
Factory
setting
04-00 MI1 Terminal function selection
0:No function
1:Forward running (FWD)
2:Reverse running (REV)
3:Three-
wire control
4:Forward Jog (FJOG)
5:Reverse jog (RJOG)
6:Terminal UP
7:Terminal DOWN
8:Coast to stop
9:Fault reset (RESET)
10:
Run pause
11:Normally open input for external fault
12:Multi-step speed command terminal 1
13:Multi-step speed command terminal 2
14:Multi-step speed command terminal 3
15:Multi-step speed command terminal 4
16:Acceleration / deceleration time selection
terminal 1
17:Acceleration / deceleration time selection
terminal 2
18:Frequency source switching
19:UP / DOWN set to cleared
(Terminal, keyboard)
20:Run command switching terminal
21:Acceleration / deceleration prohibited
22:PID
pause
23:PLC status reset
24:Wobble frequency pause
25:Counter input
26:Counter reset
27:Length count input
28:Length reset
29:Torque control prohibited
30:PULSE (pulse) frequency input (MI5)
31:reserved
32:Immediate DC braking
33:Normally closed input for external fault
34:Frequency modification enable
35:PID action direction is reversed
36:External stop terminal 1
37:Control command switching terminal 2
38:PID integration pause
39:Frequency source X and keyboard set
frequency switching
40:Frequency source Y and keyboard set
frequency switching
41:Reserved
42:Reserved
43:PID parameter switching
44:Reserved
45:reserved
1
04-01 MI2 Terminal function selection 2
04-02 MI3 Terminal function selection 9
04-03 MI4 Terminal function selection 0
04-04
MI5 Terminal function selection
(high-speed pulse optional)
0
04-05 Reserved 0
04-06 Reserved 0
04-07 Reserved 0