113
Output current
Time
Arbitrary arrival current
Arbitrary arrival current
detection signal
Arbitrary arrival current width
Arbitrary arrival current width
MO1
，
RELAY
，
DFM(M)
OFF
ON
OFF
OFF
ON
ON
Figure 5-24 Schematic diagram of arbitrary arrival current detection
09-42
Timing function selection
Factory setting
0
Setting range
0
Invalid
1
Valid
09-43
Timed running time selection
Factory setting
0
Setting range
0
09-44 Setting
1
AVI1
2
AVI2/ACI
3
Reserved
Analog input range 100% corresponds to 09-44
09-44
Timed running time
Factory setting
0.0Min
Setting range 0.0Min
～
6500.0Min
09-42 when the timing function selection is valid, the inverter starts timing when it starts, and when the set timing
operation time is reached, the inverter automatically stops, and the multi-function output terminal (function 30)
outputs an ON signal.
Every time the inverter starts, it starts counting from 0, and the remaining running time can be checked through
99-20. The scheduled running time is set by 09-43 and 09-44, and the time unit is minutes.
09-45
Lower limit of AVI1 input voltage protection value
Factory setting
3.10V
Setting range 0.00V
～
09-46
09-46
Upper limit of AVI1 input voltage protection value
Factory setting
6.80V
Setting range 09-45
～
11.00V
When the value of the analog input AVI1 is greater than 09-46, or the AVI1 input is less than 09-45, the inverter's
multi-function output terminal (function 31) outputs an ON signal, which is used to indicate whether the AVI1 input
voltage is within the set range.
Summary of Contents for S3100A Series
Page 1: ...S3100Aseries inverter General Open loop Vector Control IM User manual User Manual ...
Page 24: ...20 Size 5 Unit mm S3100A 4T45G 55P 4T110G Size 6 Unit mm S3100A 4T110G 132P 4T160G 185P ...
Page 25: ...21 Size 7 Unit mm S3100A 4T185G 200P 4T220G Size 8 Unit mm S3100A 4T220G 250P 4T315G ...
Page 26: ...22 Size 9 Unit mm S3100A 4T315G 355P 4T400G 450P Size 10 Unit mm S3100A 4T450G 500P 4T500G ...
