Savch S3100A Series, User Manual

Page: 57 / 157

53
11 Fault and protection parameters

indicates that the parameters can be set during operation.
Parame
ter
Parameter function Setting range
Factory
setting
11-22
Inverter status at the third (latest)
fault
－ －
11-23
Power-on time at the third (latest)
fault
－ －
11-24
Running time at the third (latest)
failure
－ －
11-27
Frequency at second failure － －
11-28
Current at second fault
－ －
11-29
Bus voltage at the second fault
－ －
11-30
Input terminal status at the second
fault
－ －
11-31
Output terminal status at the second
fault
－ －
11-32
Inverter status at the second fault
－ －
11-33
Power-on time at the second fault
－ －
11-34
Running time on second failure
－ －
11-37
Frequency at first failure
－ －
11-38
Current at first fault
－ －
11-39
Bus voltage at first fault
－ －
11-40
Input terminal status at the first fault
－ －
11-41
Output terminal status at the first fault － －
11-42
Inverter status at first fault
－ －
11-43
Power-on time at first failure
－ －
11-44
Operating time at first failure － －
11-47
Fault protection action selection1
Single digit:Motor overload
0:Coast to stop
1:Stop according to the stop mode
2:Continue to run
Tens digital:input phase loss(Same bit)
hundreds digital:output phase loss(Same
bit)
thousands digital:External fault(Same bit)
ten thousands digital:Communication
error(Same bit)
0
