Savch S3100A Series, User Manual

Page: 40 / 157

36
02 Vector control parameters

indicates that the parameters can be set during operation.
Parame
ter
Parameter function Setting range
Factory
setting
02-10
Torque upper limit source in
speed control mode
0:Parameter 02-07 setting
1:AVI1
2:AVI2 / ACI
3:reserved
4:PULSE pulse setting
5:
Communication setting
6:MIN (AVI1, AVI2 / ACI)
7:MAX (AVI1, AVI2 / ACI)
The full scale of the 1-7 option corresponds to
02-07
0

02-13
Excitation adjustment proportional
gain
0
～
60000 2000

02-14 Excitation adjustment integral gain 0
～
60000 1300

02-15
Torque adjustment proportional
gain
0
～
60000 2000

02-16 Torque adjustment integral gain 0
～
60000 1300

02-17 Velocity loop integral properties
Single unit: integral separation
0: invalid
1: valid
0

03 V/f control parameters

indicates that the parameters can be set during operation.
Parame
ter
Parameter function Setting range
Factory
setting
03-00 V/f curve setting
0:Straight line V/f
1:Multi-point V/f
2:Square 2.0
3:1.2 power V/f
4:1.4 power V/f
6:1.6 power V/f
8:1.8 power V/f
9:Reserved
10:V/f complete separation mode
11:
V/f half separation mode
0
03-01 Torque boost
0.0%:(auto-torque boost)
0.1%
～
30.0%
Type setting

03-02 Cut-off frequency of torque boost 0.00Hz
～
max frequency 50.00Hz
03-03 Multi-point V/f frequency 1 0.00Hz
～
03-05 0.00Hz
03-04 Multi-point V/f voltage 1 0.0%
～
100.0% 0.0%
03-05 Multi-point V/f frequency 2 03-03
～
03-07 0.00Hz
03-06 Multi-point V/f voltage 2 0.0%
～
100.0% 0.0%
03-07 Multi-point V/f frequency 3 03-05
～
motor ratedfrequency(01-03) 0.00Hz