110
Acceleration
time 2
Time
Output frequency
Hz
Set frequency
09-25
09-26
Acceleration time 1
Deceleration time 1
Deceleration
time 2
Figure 5-20 Acceleration and deceleration time switching diagram
09-27
Terminal jogging priority
Factory setting
0
Setting range
0
Invalid
1
Valid
This parameter can set the priority of the terminal jog command to the highest.
When the terminal jog priority is effective, if the terminal jog command appears during the operation, the inverter
will switch to the terminal jog running state.
09-28
Frequency detection value(FDT2)
Factory setting
50.00Hz
Setting range 0.00Hz
～
Max frequency
09-29
Frequency detection hysteresis(FDT2)
Factory setting
5.0%
Setting range 0.0%
～
100.0%(FDT2 Level)
The frequency detection function is exactly the same as the function of FDT1. Please refer to the relevant
description of FDT1, namely the description of parameters 09-19 and 09-20.
09-30
Arbitrary arrival frequency detection value 1
Factory setting
50.00Hz
Setting range 0.00Hz
～
Max frequency
09-31
Arbitrary arrival frequency detection width 1
Factory setting
0.0%
Setting range 0.0%
～
100.0%(Max frequency )
09-32
Arbitrary arrival frequency detection value 2
Factory setting
50.00Hz
Setting range 0.00Hz
～
Max frequency
09-33
Arbitrary arrival frequency detection width 2
Factory setting
0.0%
Setting range 0.0%
～
100.0%(Max frequency )
Summary of Contents for S3100A Series
Page 1: ...S3100Aseries inverter General Open loop Vector Control IM User manual User Manual ...
Page 24: ...20 Size 5 Unit mm S3100A 4T45G 55P 4T110G Size 6 Unit mm S3100A 4T110G 132P 4T160G 185P ...
Page 25: ...21 Size 7 Unit mm S3100A 4T185G 200P 4T220G Size 8 Unit mm S3100A 4T220G 250P 4T315G ...
Page 26: ...22 Size 9 Unit mm S3100A 4T315G 355P 4T400G 450P Size 10 Unit mm S3100A 4T450G 500P 4T500G ...
