manualshive.com logo in svg

SATO CT4-LX, Operator'S Manual, Page: 99 / 564

Share
Download
SATO CT4-LX Operator'S Manual Download Page 99

99

Configuring the Interface Settings

Interface Setting Methods

Configure the interface settings of the product according to the communication conditions of the

connected network and computer.
You can set the interface settings of the product doing either of the following.

•

Set from the Settings mode of the product

•

Set using the All-In-One Tool from the computer

Configuring the Interface Settings from the Settings Mode of the Product

Configure the settings related to the interfaces from the [Interface] menu, [Bluetooth] menu, or [Wi-Fi]

menu of the Settings mode of the product.
 

 

1. Tap [SETTINGS] on the Home screen or Offline screen.

2. Input the password if it is enabled.

3. Tap [Interface], [Bluetooth], or [Wi-Fi]. The screen is switched by tapping  /  or

sliding the screen to the left or right.

To configure settings related to LAN/USB/NFC/RS-232C connections or CR/LF, CAN/DLE codes,

tap [Interface].
To configure settings related to Bluetooth, tap [Bluetooth].
To configure settings related to wireless LAN, tap [Wi-Fi].

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments