SATO CT4-LX, Operator'S Manual, Page: 159 / 564

159
If there are multiple sheets between the print head and paper end sensor when a paper end error
is detected, the paper end error occurs after feeding the media that is remaining.
A paper end error also occurs if the position of the last edge that was detected reaches the print
head position while the remaining media is being fed.
A paper end error occurs while printing, depending on the length of the labels, but reprinting is
done after the error is cleared.
(1) Print head position
(2) Paper end sensor
(3) Amount of media remaining
(4) Position of last edge detected is saved
For [non-Adhesive Tag] (Fan-fold Media)
• A paper end error occurs when media is fed 50 mm (1.97") after 2 is printed.
• If an error occurs while printing, then 2 is reprinted after the error is cleared. If printing has
finished when an error occurs, then 2 is not reprinted. (Also, if printing finishes while feeding the
50 mm (1.97"), then reprinting is not done.)
• In cutter mode, cutting is not done if a paper end error occurs.
• This cannot be used in dispenser mode or linerless mode.
(1) I-mark
(2) Feed direction