Home
/
SATO
/
CT4-LX
/
Operator'S Manual

SATO CT4-LX, Operator'S Manual, Page: 278 / 564

Share

Page: 278 / 564

SATO CT4-LX Operator'S Manual Download Page 278

[Installation Log]

278

Standard

Shows the video for cleaning procedures (standard specifications).

Linerless

Shows the video for cleaning procedures (linerless specifications).

[Build Version]

Shows the product's version and other information.
Name

Shows the name of the build version.

Date

Shows the build date.

Checksum

Shows the checksum of the build version.

Kernel Version

Shows the kernel version.

Boot Version

Shows the boot version.

[Applications]

Shows the printer language, etc., and versions of applications that are installed on the product.

[Installation Log]

Show or clear the installation log data in the product.
The setting items are as follows:
Press the [CLEAR] to clear the selected log data.

•

This screen does not appear if there is no log data in the product.

[RPM log]

Shows a list of RPM log files containing three sections: installed, updated and obsolete.
The RPM log file is created after installing a pkg-file containing rpm-files.

[System Restore]

Shows the system restore log.
The system restore log file is created after a pkg-file is installed that makes it impossible to do panel

operations on the product.

«
...
276
277
278
279
280
...
»

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments