Home
/
SATO
/
CT4-LX
/
Operator'S Manual

SATO CT4-LX, Operator'S Manual, Page: 237 / 564

Share

Page: 237 / 564

SATO CT4-LX Operator'S Manual Download Page 237

237

[Standalone] Menu

•

Only [Home Key Confirmation] and [Delete Application] appear when the [AEP] menu

is disabled.

•

AEP does not support RFID.

The following settings are available in the [Standalone] menu:

[AEP]

Enable or disable AEP (Application Enabled Printing) mode.
AEP mode allows you to use the product as a standalone printer by running applications within the

product.
In AEP mode, you can use USB keyboards and barcode scanners to input data.

•

Contact your SATO sales representative for more information about the use of AEP

mode.

•

A message prompting you to restart the product will appear on the Home screen if you

have made any changes. In such a case, reboot the product to apply the settings.

•

Online printing is not available when [AEP] is enabled. Disable [AEP] to perform online

printing.

•

The available menus and port specifications in the [Interface] > [Network] > [Settings]

> [LAN] > [Ports] menu and the [Wi-Fi] > [Wi-Fi Setting] > [Ports] menu change

depending on whether [AEP] is set to enabled or disabled.

[Initial Display at Start-Up]

Select the screen to show at product startup in AEP mode.
Appears only if [AEP] menu is enabled.

«
...
235
236
237
238
239
...
»

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments