manualshive.com logo in svg

SATO CT4-LX, Operator'S Manual, Page: 93 / 564

Share
Download
SATO CT4-LX Operator'S Manual Download Page 93

93

(3) Wireless LAN/Bluetooth (optional)

 

(4) RS-232C (option)

 

(5) NFC

 

 

•

The NFC interface supports the handover function that simplifies the Bluetooth/Wi-Fi

connection setup with Android devices. In addition, the NFC interface can be used for

changing product settings with an Android device while the product is powered off and

the power cord is not connected.

USB Interface Connection (Standard)

Connect the interface cable when the product is powered off.
Connect the USB cable to the USB connector (Type B) (1) of the product.

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments