manualshive.com logo in svg

SATO CT4-LX, Operator'S Manual, Page: 38 / 564

Share
Download
SATO CT4-LX Operator'S Manual Download Page 38

Operations in the Home Screen

38

Operations in the Home Screen

While the product is powered on, you can switch to the Home screen by pressing the 

 (Power/

Home) button.
The Home screen does not appear when print jobs remain in the product.
You can perform the following operations on the Home screen.

(1) Enters the Settings mode. Various settings of the product can be operated here.
(2) Displays the setting menus of the SATO RF Analyze function on an RFID model. This function

allows you to measure RFID tags and easily set conditions to consistently write and read the

tags.

(3) Access media profiles (combinations of media types and print settings) that have been registered,

and apply them to the product.

An icon is added to the Home screen for each media profile that is registered in the [Tools] >

[Media Profiles Editing] menu in the Settings mode.

 

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments