SATO CT4-LX Operator'S Manual Download Page 183

Page: 183 / 564

183

[Interface] Menu

The following settings are available in the [Interface] menu:

•

The [RS-232C] menu appears only if the optional RS-232C kit is installed.

•

The [RFID] menu appears only for the RFID models.

[Network]

This menu is to use LAN for the interface between the computer and the product.
The setting items are as follows:

[Settings]

Set the LAN.
The setting items are as follows:

[LAN]

Set IPv4 or IPv6, the TCP/IP port number, and a proxy for the LAN.
The setting items are as follows:

[IPv4 (LAN)]

Set the IPv4 for the LAN.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 183 / 564

Search results

Summary of Contents for CT4-LX

Reviews: