SATO CT4-LX Operator'S Manual Download Page 95

Page: 95 / 564

•

If it does not communicate well, shift the Android device to the front, back, left and

right, and then hold it up again.

•

For the operation of the NFC for the Android device, refer to the user manual for the

Android device.

LAN Interface Connection (Standard)

Connect the interface cable when the product is powered off.
Connect the LAN cable to the LAN connector (1) on the product.

The communication condition settings must be configured according to your network environment. Set

the IP address of the product.
The IP address of the product can be set through the product's [Interface] menu or the All-In-One Tool.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 95 / 564

Search results

Summary of Contents for CT4-LX

Reviews: