SATO CT4-LX Operator'S Manual Download Page 49

Page: 49 / 564

4. Select an item and adjust the setting.

5. Tap or press the

(Power/Home) button.

Returns to the Offline screen.

6. Tap [ONLINE] or press the

(Power/Home) button.

The product switches to Online mode, and printing restarts using the adjusted settings.

•

When the [Printing] > [Advanced] > [Prioritize] menu is set to [Commands] and if the

print settings have been specified by command, the changes made in the Adjustments

mode are applied only to the data already analyzed at that time. The settings specified

by command will be applied to the rest of the data.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 49 / 564

Search results

Summary of Contents for CT4-LX

Reviews: