Home
/
SATO
/
CT4-LX
/
Operator'S Manual

SATO CT4-LX, Operator'S Manual, Page: 433 / 564

Share

Page: 433 / 564

SATO CT4-LX Operator'S Manual Download Page 433

433

Maintenance

Cleaning the Product

Cleaning

A dirty print head or platen roller not only affects the print quality but also causes errors and

malfunctions. Clean the product periodically to keep it running reliably.

•

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

•

Disconnect the power cord from the AC outlet before you begin cleaning.
The print head and its surroundings are hot after printing. Wait until the product cools

down.

•

Touching the edge of the print head with your bare hand could cause injury.

•

Be careful not to touch the cutter blade when cleaning the product.

•

Use our recommended cleaning products for cleaning. Do not clean with a hard object.

Doing so could cause damage.

•

Remove the media and ribbon before cleaning.

•

Open the top cover and remove linerless labels from the platen roller if they are not

used for printing for a long period. Paper jam might occur if the top cover is closed for a

long period with linerless labels loaded.

•

Contact your SATO reseller or technical support to purchase the cleaning kit, cleaning

sheets, and other of our cleaning products.

«
...
431
432
433
434
435
...
»

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments