SATO CT4-LX, Operator'S Manual, Page: 434 / 564

Cleaning Intervals
434
Cleaning Intervals
Clean the product at the following regular intervals.
• The below cleaning intervals are only for reference. Clean the product when necessary
even if you are not at a regular interval.
• After every media roll or after printing 50 m (164.0 feet) of print media
Use a cotton swab or cotton cloth dampened with cleaning liquid to clean the following parts:
◦ Print head
◦ Platen roller
Use the cleaning kit to clean following parts:
◦ Media sensors
◦ Media guide
◦ Media route
• After every 6 media rolls or after printing 300 m (984.3 feet) of print media
Use the cleaning sheet to clean the following parts:
◦ Print head
Cleaning guidelines for when the optional linerless cutter kit is installed are as follows:
• After you print one media roll or whenever there is any glue residue or paper dust on the media
route
Use a cotton swab or cotton cloth dampened with cleaning liquid, and the cleaning kit to clean the
following parts:
◦ Linerless platen roller
◦ Print head
◦ Media guide
◦ Media sensors
◦ Media route