SATO CT4-LX Operator'S Manual Download Page 445

Page: 445 / 564

445

Replacing Consumable Parts

Replacing the Print Head

You can easily remove and replace a damaged or worn print head.

•

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

•

Disconnect the power cord from the AC outlet before you replace the print head.

•

Wear gloves before replacing the print head, to prevent damage to the print head.

1. Make sure that the product is powered off, and disconnect the power cord from the

AC outlet.

2. Press the cover open latch (1) to open the top cover (2).

3. Pull out the parts (3), on which

are engraved.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 445 / 564

Search results

Summary of Contents for CT4-LX

Reviews: