SATO CT4-LX Operator'S Manual Download Page 79

Page: 79 / 564

Powering Off the Product

•

Do not connect or disconnect the power cord while your hands are wet. Doing so could

cause an electric shock.

•

Do not power off the product during operation, such as when printing or updating.

Doing so could cause a malfunction of the product.

•

Do not operate the product or disconnect the power cord while the product is powering

off.

•

An incorrect power on/off operation may damage the product settings. In such a case,

the product settings are reset to their initial values. It is always recommended to use

the power button to allow proper shutdown of the product and ensure changes made to

menu settings are saved appropriately.

1. Before you power off the product, make sure that the product is in Offline mode.

If "Online" is displayed on the display, tap [OFFLINE] to switch to Offline mode.

2. Press the

(Power/Home) button (1) for more than 2 seconds.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 79 / 564

Search results

Summary of Contents for CT4-LX

Reviews: