manualshive.com logo in svg

SATO CT4-LX, Operator'S Manual, Page: 457 / 564

Share
Download
SATO CT4-LX Operator'S Manual Download Page 457

457

Error Message 1003 (Parity Error)

When there is an error with the product, the error message appears on the screen.
Tap the error number button to show the details screen.
Check the cause and countermeasure, and then take appropriate action.
 

To clear the error:
Tap [CLEAR] or tap [SETTINGS] to adjust the settings.

Cause and Countermeasure

Reference

Cause (1)

RS-232C settings are incorrect.

Countermeasure (1)

Set the interface settings of the product again.

 

RS-232C

Cause (2)

The RS-232C cable is not connected

correctly.

Countermeasure (2)

Power off the product, connect the RS-232C

cable correctly, and then power on the product

again.

 

Powering On/Off the Product

RS-232C Interface Connection (Optional)

Contact your SATO technical support if the error cannot be resolved.

Contact Information for When You Are in Trouble

Summary of Contents for CT4-LX





















































































































































































































































































































































































































































































































































































Reviews:

No comments