SATO CT4-LX Operator'S Manual Download Page 22

Page: 22 / 564

Limitation of Liability

•

SATO Corporation and its subsidiaries in Japan, the U.S. and other countries make no

representations or warranties of any kind regarding this material, including, but not limited to,

implied warranties of merchantability and fitness for a particular purpose. SATO Corporation shall

not be held responsible for errors contained herein or any omissions from this material or for any

damages, whether direct, indirect, incidental or consequential, in connection with the furnishing,

distribution, performance or use of this material.

•

Specifications and contents in this document are subject to change without notice.

•

Be sure to perform a virus check on the USB memory before connecting it to the product. SATO

Corporation shall not be held responsible for any product malfunctions caused by a virus spread

via USB memory.

•

Various types of data registered in the product and applications may be damaged. We

recommend saving data separately in advance.

Summary of Contents for CT4-LX




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CT4-LX

Reviews:

SATO CT4-LX, Operator'S Manual, Page: 22 / 564

Search results

Summary of Contents for CT4-LX

Reviews: