
Bluetooth Interface Connection (Optional)
98
The IP address of the product can be set through the product's [Wi-Fi] menu or the All-In-One Tool.
•
To use the printer driver, the communication protocol must be set to Status4. (The
initial value of the communication protocol for the product's wireless LAN interface is
Status4 ENQ.)
•
The product does not support Atheros, SuperG, or XR functions.
Bluetooth Interface Connection (Optional)
Check if the wireless LAN/Bluetooth kit (1) is attached to the product.
Wireless communications is possible with Bluetooth-compatible computers that are placed within
about 10 m (32.8 feet) of the product.
Make sure that the Bluetooth function of the product and the computer are enabled, and then add the
product as a Bluetooth device on the computer.
The product's Bluetooth function is enabled by default and can be configured from the [Bluetooth]
menu or the All-In-One Tool.
•
Bluetooth connection may be unstable depending on a module spec or version of
Bluetooth. When using Bluetooth connection, please test the operation beforehand in
your usage environment (computer, print data, print quantity, print frequency, etc.).
•
To use the printer driver, the communication protocol must be set to Status4. (The
initial value of the communication protocol for the product's Bluetooth interface is
Status4 Multi.)
Summary of Contents for CT4-LX
