SATO CT4-LX, Operator'S Manual, Page: 289 / 564

289
[Gateway]
Set and check the default gateway address.
Cannot be changed when [Wi-Fi Direct] is enabled.
If you have selected [DHCP] in the [Mode] menu, the screen shows the gateway address you received
from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the default gateway address.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• The gateway address set here is shared with the settings in [Interface] > [Network] >
[Settings] > [LAN] > [IPv4 (LAN)].
[DNS]
Only appears when [Wi-Fi Direct] is disabled.
Set and check DNS server addresses.
If you have selected [DHCP] in the [Mode] menu, the screen shows the DNS server address you
received from the DHCP server.
If you have selected [Static] in the [Mode] menu, set the address of the DNS server.
The setting range is as follows:
000.000.000.000 to 255.255.255.255
• You can register up to three IP addresses for the DNS server. Use a comma to delimit
different IP addresses.
• The DNS server address set here is shared with the settings in [Interface] > [Network]
> [Settings] > [LAN] > [IPv4 (LAN)].
[IPv6 (Wi-Fi)]
Configure IPv6 for Wi-Fi.
Only appears when [Wi-Fi Direct] is disabled.
•
After doing the settings, press the (Power/Home) button.
After a message asking you whether to save the settings appears, tap .
If there are any errors with the input information, a message asking you whether to
discard changes appears. Tap
to discard the changes. Tap to redo the settings.
The setting items are as follows:
[Mode]
Select the IP address assignment method or disable IPv6.
The options are as follows:
Disable
Disable IPv6.