SATO CT4-LX, Operator'S Manual, Page: 226 / 564

[STCL]
226
Custom
Change the first to third byte codes.
[1st Byte Code]
Set the first byte code.
You can change the code only if you have selected [Custom] in the [Control Code] menu.
The setting range is from 0 to 255.
• Each code must be set to different values.
[2nd Byte Code]
Set the second byte code.
You can change the code only if you have selected [Custom] in the [Control Code] menu.
The setting range is from 0 to 255.
• Each code must be set to different values.
[3rd Byte Code]
Set the third byte code.
You can change the code only if you have selected [Custom] in the [Control Code] menu.
The setting range is from 0 to 255.
• Each code must be set to different values.
[Font Settings]
Set the font.
The setting items are as follows:
[Zero Slash]
Set whether to print the number zero (0) with or without a slash (/).
Print zero with a slash.
Print zero without a slash.
[€]
Set the European currency symbol to the ASCII code.
The setting range is from 0 to FF (hexadecimal).